Suche Version TAG HEUER MONACO
Verfasst: So 3. Jul 2011, 11:30
Hi Leute,
mein Lieferant hat leider nicht so eine gute Version von der Monaco.
Folgende Fehler sind vorhanden bei den meisten Versionen:
(i) Tag Heuer name on the case is in white (original: black)
(ii) seconds are at 3 o'clock position, the chrono's minute counter is at 9 o'clock (original: vice versa)
(iii) the case is 4mm too high - creating the "extreme thick" 19-20mm overall watch height (original ~14-15mm)
(iv) the four diagonal "shock adsorber" screws are in silver finish (original: black)
(v) misspelling of "cenifugal system" on the rear side (original "centifugal system").
(vi) as usual with most replicas, the leather strap qualifiy is a bit stiff and gives rather a plastic and artificial leather haptic impression.
Würde mich freuen, wenn Ihr mir ein paar Hinweise geben könntet.
Bernd
mein Lieferant hat leider nicht so eine gute Version von der Monaco.
Folgende Fehler sind vorhanden bei den meisten Versionen:
(i) Tag Heuer name on the case is in white (original: black)
(ii) seconds are at 3 o'clock position, the chrono's minute counter is at 9 o'clock (original: vice versa)
(iii) the case is 4mm too high - creating the "extreme thick" 19-20mm overall watch height (original ~14-15mm)
(iv) the four diagonal "shock adsorber" screws are in silver finish (original: black)
(v) misspelling of "cenifugal system" on the rear side (original "centifugal system").
(vi) as usual with most replicas, the leather strap qualifiy is a bit stiff and gives rather a plastic and artificial leather haptic impression.
Würde mich freuen, wenn Ihr mir ein paar Hinweise geben könntet.
Bernd